WATER AND WASTE WATER TREATMENT
PERFORMANCE³. PINPOINT CONTROL OF LOAD CYCLES. FOR A COMPLETELY NEW KIND OF EFFICIENCY IN AERATION TANKS.
Variable air requirements and peculiarities in the design and construction of aeration tanks are challenges for any sewage treatment plant. The result: extremely high energy consumption that can make up to 80% of total costs. The solution: innovative combinations of blower, hybrid and turbo blowers from CIME. Maximum energy efficiency for basic loads, pinpoint adjustments for peak loads. The result: hitherto unknown efficiencies over the entire operation. The investment can pay for itself in as little as 2 years!
MOST EFFECTIVE BLOWER TECHNOLOGY FOR WASTEWATER
There are many options to apply methods to avoid damaging the environment. In the case of wastewater e.g. the ventilation of the sediment tank or the pressure ventilation of biological wastewater treatment systems. The oxygen introduction is important, for deep wastewater tanks, wastewater treatment systems with standard aeration tanks or natural clarification ponds alike.
If the wastewater has already entered the natural cycle, ventilating lakes and rivers prevents additional contamination. When treating drinking water, rinsing the filters with compressed air ensures that perfect water is provided and natural water reserves are not used excessively.
Gas which occurs on landfill sites, digestion towers or gas which is produced when treating wastewater does not escape into the environment anymore or is not just burned. It is used sustainably to create energy to relieve the environment and remedy resource deficits. Due to the pressure increase of biogas blowers, the gas is transported to CHPs or generators where the converted energy can be used to heat buildings or greenhouses, for example. The produced gas is measured by CIME rotary piston gas meters.
During sludge drying processes, CIME positive displacement blowers can be used for the subsequent pneumatic transport of the dried sludge.
CIME products not only do their job in the examples given above. Just as there are many options to protect the environment, there are many areas of application for CIME positive displacement blowers, rotary lobe compressors and turbo blowers.